Operating instructions

Parameter
Values
Description
Comments
Default MAC
Address
aa:bb:cc:dd:ee:ff
Gex port’s MAC
address (This cannot
be changed by the
user)
Read only parameter
Link Status
Link Up (1000)
Link up and link speed
1000 Mbps
Read only parameter
Link Up (100)
Link up and link speed
100 Mbps
Link Down
Link Down
Link Up Time
days : hours :
mins : secs
The length of time
that the link has been
up. If the link goes
down this value is
reset to 0
Read only parameter
TX Packets
Number of IP packets
transmitted
Read only parameter
RX Packets
Number of IP packets
received
Read only parameter
IP Address
aaa.bbb.ccc.ddd
IP address of the
control port
Subnet Mask
0.0.0.0 [default]
aaa.bbb.ccc.ddd
Subnet mask for the
control port
Default
Gateway
0.0.0.0 [default]
No defined gateway
aaa.bbb.ccc.ddd
Gateway address for
packets outside the
defined subnet
The data Ethernet ports Ge 1 and Ge 2 are paired together, and accept data input. Ge 3 and
Ge 4 are also paired together, and are the data output. Each port of the output pair
transmits the same multicasts.
If the IP address, or subnet mask of a secondary port is set to 0.0.0.0, then it will be
assumed that it is operating in a mirrored redundancy mode with the primary port, and
therefore has the same IP address and subnet mask.
© Ericsson AB 2011. All rights reserved