Specifications

Appendix
RX8200 Configuration Guide
xii
 Video Not Running (relay mapping) – Place a check mark in the box to activate relay mapping for video not
running.
 Decoder 1/2/3/4/5/6 – Select the alarm condition from the drop-down menu to be activated when decoder 1/2/3/4/5/6
is not running (Set Alarm /No Alarm).
 Decoder 1/2/3/4/5/6 (relay mapping) – Place a check mark in the box to activate relay mapping for decoder
1/2/3/4/5/6 not running.
 Closed Caption Fail – Select the alarm condition from the drop-down menu to be activated when closed caption
fails (Set Alarm /No Alarm).
 Closed Caption Fail (relay mapping) – Place a check mark in the box to activate relay mapping for closed caption
fails.
 CA Error – Select the alarm condition from the drop-down menu to be activated when a Conditional Access error is
detected (Set Alarm /No Alarm).
 CA Error (relay mapping) – Place a check mark in the box to activate relay mapping for Conditional Access error.
Environment
 OverTemperature – Select the alarm condition from the drop-down menu to be activated when an internal
temperature value, set below, is exceeded (Set Alarm /No Alarm).
 Temp (Max Value) – Enter the maximum allowable internal temperature value (degrees Centigrade). This is used to
trigger the alarm condition, set above, when exceeded.
 OverTemperature (relay mapping) – Place a check mark in the box to activate relay mapping for an
overtemperature condition.
 Fan 1/2/3/4 Failed – Select the alarm condition from the drop-down menu to be activated when the fan speed is zero
(Set Alarm /No Alarm).
 Fan 1/2/3/4 Failed (relay mapping) – Place a check mark in the box to activate relay mapping for fan 1/2/3/4 failure.