Specifications

GENERAL OPERATION
• NOTE: The following description briefly outlines the operation of your VHF synthesized mobile radio. Consult
the operator’s manual for a complete description of all the modes of operation.
RADIO ON/OFF, POWER UP
1. Turn the radio on by turning the VOLUME control one-half turn clockwise. After "4000" appears in the
display and the power up alert tone is generated, the display will change to the #1 priority channel. If no
priority channel has been programmed, the display will change to channel 1.
2. Turn the radio off by rotating the VOLUME control fully counter-clockwise.
RECEIVING
1. Turn the radio on and select the desired channel.
2. Depress the MONITOR button (2) if necessary to illuminate it’s backlight. Adjust the volume control to a
comfortable listening level.
3. Rotate the SQUELCH control clockwise until the squelch noise (rushing sound) is no longer present.
4. Depress the MONITOR button (2) to extinguish the black light.
• NOTE: If the radio is equipped with coded squelch options, depress the MONITOR button (2) to enable the
option; the CALL indicator will no longer be illuminated.
TRANSMITTING
1. Turn the radio on and select the desired channel.
2. Pick up the microphone and listen briefly to insure the channel is clear. Alternatively, leave the microphone
on-hook and depress the MONITOR button (2).
3. Depress the PTT switch on the side of the microphone. Hold the microphone one to two inches from the
mouth and speak in a normal tone of voice. The TX indicator should be illuminated.
4. Release the PTT switch when the message is completed.
MONOGRAM SERIES LBI-38864B
GENERAL OPERATION
Page -9-
Nov. 94