Specifications

LIP-8002/8002A
iPECS Installer Guide
90
Section
Field Name
Description
digitmap_process
Defines the digit map process for a dial plan.
Valid values are:
• num: the digitmap string, maximum 512-characters.
• trunc: number of digits to strip, 0 to 30.
• prefix: digits to insert in front of the number, maximum 32
digits.
• post: digits to insert at the end of the number, maximum
32 digits.
The default is blank.
prog
Specifies the flexible button number being assigned.
Valid values are 1 to 4.
The default is blank.
func
Specifies the function for flexible buttons not assigned as a
line.
Valid values are:
• 1 — Speed Dial
• 2 — Phonebook
• 3 — Call Log
• 4 — Mute
• 6 — Last number redial
• 7 — Last call return
• 8 — Forward
• 9 — Conference
• 10 — Transfer
• 11 — Hold
• 12 — DND
• 13 — Ringer Off
• 14 — Message
• 46 — Voice Record
• 48 — Blind Transfer
The default is blank.
add
num
Specifies the number for a Speed dial button.
The default is blank.
prog
Specifies the flexible button number being assigned.
Valid values are 1 to 4.
The default is blank.
PROG
label
string
Specifies the label for flexible buttons.
The maximum length is 15-characters.
The default is blank.
callnum_in_line
Defines the number of active calls on a line.
Valid value is 1~ 3.
The default value is 3.
caller_id_blk
Controls caller ID blocking. When enabled, the phone sends
the anonymous caller id.
Valid values are enable or disable.
The default is disable.
anonymous_call_blk
Controls blocking incoming calls with an anonymous caller id.
Valid values are enable or disable.
The default is disable.
CALL
call_waiting
Controls visual notification of incoming call while busy.
Valid values are enable or disable.
Default is enable.