Specifications

LIP-8002/8002A
iPECS Installer Guide
3
Number Function
Left button - Move to the previous menu in the settings menu.
Right button
Up button - When the phone is in the idle state, accesses the call log.
1
Down button - When the phone is in the idle state, accesses the
phonebook.
2
OK button - Select a current item or save a value in the settings menu.
Retrieve a hold Call button (In Hold State) - Use to retrieve a hold call.
3
Settings button - ‘Settings’ accesses and exits the menu for display
and changes to the IP Phone configuration.
4 Redial button - Use to dial the last number dialed.
5
Mute button - Toggle audio from the microphone to the connected
party On and Off.
6
Volume control button - Use to adjust Ring, Handset, and Speaker
volume.
7
Speakerphone button - Toggle the IP phone speakerphone On and
Off.
8
Mode button (In Editing State) - Use to switch the input mode can
accept an alphanumeric entry.
Forward button (In Idle State) - Use to set the call forwarding
configuration.
Transfer button (In Call State) - Use to transfer the current active call.
9
Delete button (In Editing State) - Use to delete a letter in front of the
cursor or clear an entire string.
Conference button (In Call State) – Use to initiate, cancel or join the
conference call.
10
Flexible buttons - Assign as feature in Phone configuration. Refer to
section 3.6.5 under Flexible Button Setting for instructions on defining
flexible buttons.
11
Dial pad buttons (In Editing State)- Use to dial a number, select a
menu item, or input a value.