Specifications

LIP-8002/8002A
iPECS Installer Guide
42
 Press the digit, or move the cursor to 4.Call Hold Ringback using the navigation buttons
and press the OK button.
 Select On to enable the Hold Ringback, or select Off to disable the Hold Ringback using the
Up/Down navigation buttons and press the OK button.
 Move to another parameter with the navigation buttons and continue the session or press the
Settings (
) button to exit the configuration session.
3.7.5 Message Waiting Tone
When notification of a new message is received, the Message LED flashes. As an option, a
‘stutter’ dial tone provides an audible indication for a message waiting. When the user goes off-
hook to place a call, the user receives stutter dial tone.
To enable/disable stutter dial tone for a message wait indication:
 Press the Settings (
) button. If the LCD Menu is locked, use the unlock procedure. Refer
to section 3.3
.
 Press the
digit, or move the cursor to 4.Call Preferences using the navigation buttons
and press the OK button.
 Press the
digit, or move the cursor to 5.Msg Waiting Tone using the navigation buttons
and press the OK button.
 Select On to enable the stutter dial tone, or select Off to disable the stutter dial tone using
the Up/Down navigation buttons and press the OK button..
 Move to another parameter with the navigation buttons and continue the session or press the
Settings (
) button to exit the configuration session.
3.7.6 Auto Answer
When idle, the IP Phone can connect an incoming caller to the speakerphone automatically.
To enable/disable Auto Answer:
 Press the Settings (
) button. If the LCD Menu is locked, use the unlock procedure. Refer
to section 3.3
.
 Press the
digit, or move the cursor to 4.Call Preferences using the navigation buttons
and press the OK button.
 Press the
digit, or move the cursor to 6.Auto Answer using the navigation buttons and
press the OK button.
 Select On to enable Auto Answer, or select Off to disable Auto Answer using the Up/Down
navigation buttons and press the OK button.
 Move to another parameter with the navigation buttons and continue the session or press the
Settings (
) button to exit the configuration session.