Specifications

LIP-8002/8002A
iPECS Installer Guide
33
3.6.6 S/W Update
Within the S/W Update selection, the type of provisioning (TFTP/HTTPS), the Server Address,
HTTPS Verification settings and DHCP Options can be viewed and changed.
3.6.6.1 Provisioning Type
The LIP-8002/8002A supports two provisioning protocols:
- Trivial File Transfer Protocol (TFTP) – a simple transfer mechanism using UDP but
lacks security and TFTP ports are often blocked at firewalls.
- Hyper-Text Transfer Protocol/Secure (HTTP/S) – employs TCP and using SSL
(Secure Sockets Layer) encryption is a more secure method. In addition, ports
employed by HTTPS are commonly available.
To assign the provisioning protocol:
 Press the Settings (
) button. If the LCD Menu is locked, use the unlock procedure. Refer
to section 3.3
.
 Press the
digit, or move the cursor to 3.Phone Settings using the navigation buttons and
press the OK button.
 Press the
digit, or move the cursor to 6.S/W Update using the navigation buttons and
press the OK button.
 Press the
digit, or move the cursor to 1.Provisioning Type using the navigation buttons
and press the OK button.
 Select the Provisioning Type (TFTP or HTTPS) using the the Up/Down navigation buttons
and press the OK button to save your entry.
 Move to another parameter with the navigation buttons and continue the session or press the
Settings (
) button to exit the configuration session.
3.6.6.2 TFTP Server Address
With TFTP provisioning selected, the IP address or FQDN of the TFTP server must be defined.
The TFTP Server Address may be retrieved automatically from the DHCP server or set
manually.
To enter a TFTP Server Address:
 Press the Settings (
) button. If the LCD Menu is locked, use the unlock procedure. Refer
to section 3.3
.
 Press the
digit, or move the cursor to 3.Phone Settings using the navigation buttons and
press the OK button.
 Press the
digit, or move the cursor to 6.S/W Update using the navigation buttons and
press the OK button.
Changing the Provisioning Type requires a reboot of the IP Phone; when you leave the
menu, you will receive a reboot notice. The IP Phone must reboot to utilize the new
values entered.
An asterisk, , displays in front of the current selection.