Specifications

LIP-8002/8002A
iPECS Installer Guide
28
3.6.2 Ring Setting
The IP Phone uses one of 4 ring signals (Ring Types) or no ring (“Ringer Off”) for incoming call
notification. The Phone Book record may have a different ring type assigned including “Ringer
Off” and “Default Ring”. The “Default Ring Type” is used when a ring type is “Default Ring”. By
assigning different ring signals to closely located phones, Phone Book records, the user can
identify the ringing phone or caller.
3.6.2.1 Default Ring Type
To select the Default Ring Type for the IP Phone:
 Press the Settings (
) button.
 Press the
digit, or move the cursor to 3.Phone Settings using the navigation buttons and
press the OK button.
 Press the
digit, or move the cursor to 2.Ring Setting using the navigation buttons and
press the OK button.
 Press the
digit, or move the cursor to 1.Default Ring Type using the navigation buttons
and press the OK button.
 Select the Ring Type using the Up/Down navigation buttons.
 Press the OK button to change to the selected Ring Type.
 Move to another parameter with the navigation buttons and continue the session or press the
Settings (
) button to exit the configuration session.
The LIP-8002/8002A uses one of 4 ring types. The Phone Book entry may use a
different type.
3.6.2.2 Trunk Ring Type
To select the Trunk ring type for the IP Phone:
 Press the Settings (
) button.
 Press the
digit, or move the cursor to 3.Phone Settings using the navigation buttons and
press the OK button.
 Press the
digit, or move the cursor to 2.Ring Setting using the navigation buttons and
press the OK button.
 Press the
digit, or move the cursor to 2.Trunk Ring Type using the navigation buttons
and press the OK button.
 Select the Ring Type using the Up/Down navigation button. The Ringer Off selection turns
the ringer off for incoming calls. The “Default Ring” uses the Default Ring Type for incoming
calls, see section 3.6.6.1
 Press the OK button to change to the selected Ring Type.
 Move to another parameter with the navigation buttons and continue the session or press the
Settings (
) button to exit the configuration session.
If “Default Ring” is assigned for a trunk ring, the “Default Ring Type” is used.
The Ring Type can be set to any of the 4 Ring types, “Default Ring” or “Ringer Off”.
When set as Ringer Off, the phone will not ring for incoming calls.
For Ring Type, an asterisk, , displays in front of the current selection.