Specifications
LIP-8002/8002A
iPECS Installer Guide
21
Press the digit, or move the cursor to 1.Line Configuration using the navigation buttons
and press the OK button.
Press the
digit, or move the cursor to 5.Auth. Username using the navigation buttons
and press the OK button.
Input the Authentication User Name using the dial pad and press the OK button to save your
entry.
Move to another parameter with the navigation buttons and continue the session or press the
Settings (
) button to exit the configuration session.
Changing the Authentication User Name requires a reboot of the IP Phone; when you
leave the menu, you will receive a reboot notice. The IP Phone must reboot to utilize
the new values entered.
To enter alphanumeric characters select the Mode button. Refer to Appendix E
for the
character mapping of dial pad digits.
3.5.1.6 Authentication Password
Authentication of the line appearance with the SIP call server uses the Authentication Password
in conjunction with the user name.
To assign the Authentication Password:
Press the Settings (
) button. If the LCD Menu is locked, use the unlock procedure. Refer
to section 3.3
.
Press the
digit, or move the cursor to 2.SIP Configuration using the navigation buttons
and press the OK button.
Press the
digit, or move the cursor to 1.Line Configuration using the navigation buttons
and press the OK button.
Press the
button, or the move cursor to 6.Auth. Password using the navigation buttons
and press the OK button.
Input the Authentication Password using the dial pad and press the OK button to save your
entry.
Move to another parameter with the navigation buttons and continue the session or press the
Settings (
) button to exit the configuration session.
Changing the Authentication Password requires a reboot of the IP Phone; when you
leave the menu, you will receive a reboot notice. The IP Phone must reboot to utilize
the new values entered.
To enter alphanumeric characters select the Mode button. Refer to Appendix E
for the
character mapping of dial pad digits.