Specifications

LIP-8002/8002A
iPECS Installer Guide
20
 Press the digit, or move the cursor to 1.Line Configuration using the navigation buttons
and press the OK button.
 Press the
digit, or move the cursor to 3.Display Name using the navigation buttons and
press the OK button.
 Input the Display Name using the dial pad and press the OK button to save your entry.
 Move to another parameter with the navigation buttons and continue the session or press the
Settings (
) button to exit the configuration session.
To enter alphanumeric characters select the Mode button. Refer to Appendix E
for the
character mapping of dial pad digits.
3.5.1.4 Name
The Name is used in SIP headers as the SIP user id or account assigned in the call server. A
name is required for proper operation and must match the user id or account assigned in the
call server.
To enter the Name:
 Press the Settings (
) button. If the LCD Menu is locked, use the unlock procedure. Refer
to section 3.3
.
 Press the
digit, or move the cursor to 2.SIP Configuration using the navigation buttons
and press the OK button.
 Press the
digit, or move the cursor to 1.Line Configuration using the navigation buttons
and press the OK button.
 Press the
digit, or move the cursor to 4.Name using the navigation buttons and press the
OK button.
 Input the Name using the dial pad and press the OK button to save your entry.
 Move to another parameter with the navigation buttons and continue the session or press the
Settings (
) button to exit the configuration session.
Changing the Name requires a reboot of the IP Phone; when you leave the menu, you
will receive a reboot notice. The IP Phone must reboot to utilize the new values
entered.
To enter alphanumeric characters select the Mode button. Refer to Appendix E
for the
character mapping of dial pad digits.
3.5.1.5 Authentication User Name
Authentication of the line appearance with the SIP call server uses the Authentication User
Name.
To assign the Authentication User Name:
 Press the Settings (
) button. If the LCD Menu is locked, use the unlock procedure. Refer
to section 3.3
.
 Press the
digit, or move the cursor to 2.SIP Configuration using the navigation buttons
and press the OK button.