Specifications

LIP-8002/8002A
iPECS Installer Guide
19
 Press the digit, or move the cursor to 1.Call Server Address using the navigation
buttons and press the OK button.
 Input the Call Server Address or FQDN using the dial pad and press the OK button to save
your entry.
 Move to another parameter with the navigation buttons and continue the session or press the
Settings (
) button to exit the configuration session.
Changing the Call Server Address requires a reboot of the IP Phone; when you leave
the menu, you will receive a reboot notice. The IP Phone must reboot to utilize the new
values entered.
To enter alphanumeric characters select the Mode button. Refer to Appendix E
for the
character mapping of dial pad digits.
3.5.1.2 Proxy Port
The Proxy Port defines the TCP/UDP port number employed for SIP signaling transport. In
common practice, port number ‘5060’ is used.
To change the Proxy Port number:
 Press the Settings (
) button. If the LCD Menu is locked, use the unlock procedure. Refer
to section 3.3
.
 Press the
digit, or move the cursor to 2.SIP Configuration using the navigation buttons
and press the OK button.
 Press the
digit, or move the cursor to 1.Line Configuration using the navigation buttons
and press the OK button.
 Press the
digit, or move the cursor to 2.Proxy Port using the navigation buttons and
press the OK button.
 Input the Proxy Port number using the dial pad and press the OK button to save your entry.
 Move to another parameter with the navigation buttons and continue the session or press the
Settings (
) button to exit the configuration session.
Changing the Proxy Port requires a reboot of the IP Phone; when you leave the menu,
you will receive a reboot notice. The IP Phone must reboot to utilize the new values
entered.
3.5.1.3 Display Name
When assigned, the Display Name is used in SIP headers as the caller id name.
To enter the Display Name:
 Press the Settings (
) button. If the LCD Menu is locked, use the unlock procedure. Refer
to section 3.3
.
 Press the
digit, or move the cursor to 2.SIP Configuration using the navigation
buttons and press the OK button.