User guide

LIP-8002/8002A iPECS IP Phone
User Guide
2. Installing your LIP-8002/8002A Phone
The figure below shows the cable connections for your IP Phone. The LAN and desktop PC connections
employ standard category 5 LAN cables terminated with RJ-45 connectors. The LIP-8002 supports PoE
(Power over Ethernet) in accordance with the IEEE-802.1af industry standard. (The LIP-8002A doesn’t
support PoE and can use only the supplied adaptor.) When connected to a PoE complaint LAN port, the
IP Phone derives power from the port. If the LAN port does not support PoE, use the AC/DC adaptor,
available separately, for connection to power. The handset connects to the base with the supplied
standard handset coiled cord. Use the chart below to make connections to the IP Phone.
1 LAN
Phone LAN port to the LAN wall jack with the provided LAN cable.
3 Power
s not required. If not supported, connect
02A doesn’t support PoE. So, must connect the IP Phone power port
to an AC
wall jack.
4 Handset Connect the Handset coiled cord to the IP Phone base and handset.
Connect the IP
2 PC Connect the IP Phone PC port to your desktop PC with an RJ-45 terminated
UTP-5 cable.
The LIP-8002 supports PoE. So, if the LAN port supports PoE, IEEE 802.3af
compliant, Class 2, the AC/DC adapter i
the IP Phone power port to the DC out of Power Adapter. Connect the Power
Adapter AC plug to an AC wall jack.
The LIP-80
to the DC out of Power Adapter. Connect the Power Adapter AC plug
3