Specifications

LBI-39000B INSTALLATION
76
7.4. INSTALLATION VERIFICATION
This section provides information on how to verify that the IMC, PI, and MD110 ISDN subsystems are working
correctly.
7.4.1. Subsystem Verification at Sites/IMC
This section discusses how to verify that the site IMC subsystems are working correctly. Please consult your radio user’s
manual for instructions on making the calls listed below. This section does not verify Jessica, the Jessica interface, or the
IMC PIM. This section may point out a problem with the GETC or Site Controller programming.
Test Results
Make a single-site individual call. Called LID unconfirmed call
Hear channel access alert tone, then audio is transmitted to the
receiving radio.
Called LID confirmed call
Hear queue tone.
Hear channel access alert tone, then audio is transmitted to the
receiving radio.
Make a multisite individual call. Called LID unconfirmed call
Hear channel access alert tone, then audio is transmitted to the
receiving radio.
Called LID confirmed call
Hear queue tone.
Hear channel access alert tone, then audio is transmitted to the
receiving radio.
Make a single-site group call. Called GID unconfirmed call
Hear channel access alert tone, then audio is transmitted to the
receiving radio.
Called GID confirmed call
Hear queue tone.
Hear channel access alert tone, then audio is transmitted to the
receiving radio.
Make a multisite group call. Called GID unconfirmed call
Hear channel access alert tone, then audio is transmitted to the
receiving radio.
Called GID confirmed call
Hear queue tone.
Hear channel access alert tone, then audio is transmitted to the
receiving radio.