Specifications

LBI-39000B INSTALLATION

Table 8 presents fields from the System Manager Logical Unit Definition (menu item 11) used for LID configuration.

Table 9 presents System Manager Group Identification (menu item 12) used for GID configuration.

Table 8 - Description of Fields Jessica Uses from LID Database

System Manager Field Application in Jessica

Interconnect: Toll Call Restrictions Defines the user’s toll call class. See section 4 herein

for details on call validation.

Radio Features: Inb Interconnect If set to Y, then the user is allowed to receive inbound

interconnect calls. If set to N, then the user is not

allowed to receive inbound interconnect calls.

Interconnect: Rotary Number or Interconnect:

Dedicated Line

Together these fields define whether outbound

interconnect calls are allowed. If either field is nonzero,

then outbound is allowed. If both fields are zero, then

outbound is not allowed.

Call Priority: Interconnect Defines the user’s interconnect priority for priority

service channels/dedicated lines.

Wide Area: Valid Site Defines whether the user is allowed access to Jessica.

If the Jessica site field is set to N, the user will not be

allowed to place or receive any interconnect calls. If the

Jessica site field is set to Y, the user is allowed to

access Jessica, subject to the restrictions above.

Table 9 - Description of Fields Jessica Uses from GID Database

System Manager Field Application in Jessica

Radio Features: Inb Interconnect If set to Y, then the group is allowed to receive inbound

interconnect calls. If set to N, then the group is not

allowed to receive inbound interconnect calls.

Call Priority: Interconnect Defines the group’s interconnect priority for priority

service channels/dedicated lines.

Wide Area: Valid Site Defines whether the group is allowed access to

Jessica. If the Jessica site field is set to N, the group

will not be allowed to receive interconnect calls. If the

Jessica site field is set to Y, the group is allowed to

access Jessica, subject to the restrictions above.

7.1.6. Jessica Proper Shutdown

For the MD110:

1. If changes to the configuration have been made since the last save, execute the following command from the MD110

terminal: DUSYI:DUMP=CHANGES. Wait for the save to complete; this can last up to 40 minutes. Do not remove

power while the save is in progress!

2. Remove MD110 power.