User`s guide

MBR L13 – User’s Guide
95
3.8.3 Routing
You can access the L13 routing settings by navigating to SystemRouting. The Routing screen initially appears in its
basic view.
Figure 3127: Routing – Basic View
 To add a routing rule:
1. Click the New Route link or the action icon. The Route Settings screen appears.
Figure 128: Route Settings
2. Fill in the fields as follows:
Name Select the network device.
Destination Enter the destination host, subnet address, network address, or default route. The destination
for a default route is 0.0.0.0.
Netmask The network mask is used in conjunction with the destination to determine when a route is used.
Gateway Enter the gateway’s IP address.
Metric Indicate the route’s priority level. Typically, the lowest metric is the most preferred route. If multiple
routes have the same metric value, the default route will be the first in the order of appearance.
3. Click OK. The route is added to the routing table.