User`s guide

MBR L13 – User’s Guide
75
belong to the selected Class of Service.
Line Group to Use
Show available external line interface to route the call through a
cellular line (Cellular 1).
Remove Digits From the
Beginning of the Dialed
Number
Select this option to remove one or more of the digits from the
beginning of the target phone number before dialing the number.
When this option is selected, the screen refreshes, and the following
field is added:
Number of Digits to Remove – Enter the number of digits to remove
from the number.
Add Digits to the
Beginning of the Dialed
Number
Select this option to add digits before dialing the telephone number.
When this option is selected, the screen refreshes, and the following
field is added:
Digits to Add – Specify the digits to be added at the beginning of the
telephone number.
3.7.3.5 CDR
The CDR (Call’s Detailed Records) section (Service  Voice  CDR) provides a list of incoming and outgoing telephony
calls that took place.
Figure 97: CDR screen
The box at the top of the screen provides the following information about the list of calls that appears in the table
below it.
Total Calls
The total number of calls released during the specified time period (see
Start time/End time below).
Start time / End time
Specify the time period to include in the CDR report.
Number of last calls to
display
Specify the maximum number of report lines to display on the screen.
CDR Files
After the CDR report is generated, the report files appear on this line. The
number of files depends on the report size and the time period covered
by the report.