User`s guide

MBR L13 – User’s Guide
65
 To enable/disable the VoIP extensions:
1. Click the extension number or its action icon. The Edit Extension screen appears.
2. Check or uncheck the Enable VoIP Extension.
Figure 87: Enable VOIP Extension
 To Configure a SIP Phone
This section provides general information about how to configure a SIP phone to work with MBR. It also includes
information about SIP phone devices.
Configure the phone with the following settings. Refer to the device's documentation if necessary.
It is highly recommended to configure a SIP phone as described below:
1. The SIP phone must be configured to get an IP address automatically when it is connected directly to the L13
LAN port. In this case, the appropriate IP address will be of the form 192.168.1.XXX, where XXX is an address
provided by the L13’s internal DHCP server.
2. The SIP phone must be configured to perform the SIP registration procedure with the L13 PBX. For this
purpose, the SIP phone must create SIP registration parameters (“User name” and “Password”), which must
correspond to the SIP extension’s account in L13. (See the next paragraph.) The IP address of the L13 unit
must be set as the SIP server registration point for the SIP phone. For a SIP phone that is connected directly
to the LAN, the SIP server IP address is 192.168.1.1.
3. A wireless (Wi-Fi) SIP device must first establish a Wi-Fi connection with the L13 wireless network, and then
run the SIP registration procedure.
 To enter the SIP VoIP extension’s parameters:
1. Navigate to Services  Voice. The Extensions screen opens. The VoIP Extensions section displays a list of the
VoIP extensions that are available in your L13. SIP devices connected directly to the gateway's LAN must be
configured to use 192.168.1.1 as their SIP server IP address and an extension account number.
2. Click New VoIP Extension. The Edit Extension screen opens.