User`s guide

MBR L13 – User’s Guide
60
Figure 83: Overview
WAN Devices Bandwidth (Rx/Tx) Before selecting the QoS profile that most suits your needs, select your bandwidth
from this drop-down menu. If you do not see an appropriate entry, select User Defined, and enter your Tx and Rx
bandwidths manually.
Tx Bandwidth This parameter defines the gateway’s outbound transmission rate. Enter your Tx bandwidth in Kbits per
second.
Rx Bandwidth This parameter defines the gateways’ Internet traffic reception rate. Enter your Rx bandwidth in Kbits
per second.
Note: Entering inaccurate Tx/Rx values will cause incorrect behavior of the QoS module. It is important to set these
fields as accurately as possible.
QoS Profiles. Select the profile that most suits your bandwidth usage. Every profile entry displays a quote describing
what the profile is best used for and the QoS priority levels granted to each bandwidth consumer in this profile.
Default
No QoS profile, however the device is limited by the requested
bandwidth, if specified.
P2P User
Peer-to-peer and file sharing applications will receive priority.
Triple Play User
VoIP and video streaming will receive priority.
Home Worker
VPN and browsing will receive priority.