User`s guide

MBR L13 – User’s Guide
45
Figure 52: Edit Service Opened Ports
10. Similar to the trigger ports screen, select UDP as the protocol, leave the source port at "Any", and enter a
3333 as the single destination port.
Figure 53: Edit Service Opened Ports
11. Click OK to save the settings.
You can disable a port triggering rule without having to remove it from the Port Triggering screen. To temporarily
disable a rule, clear the check box next to the service name. To reinstate it at a later time, simply reselect the check
box. To remove a rule, click the action icon for the service. The service will be permanently removed.
Note: There may be a few default port triggering rules listed when you first access the port triggering screen. Please
note that disabling these rules may result in non-existent gateway functionality.
3.7.1.7 Website Restrictions
You may configure the L13 to block specific Internet Web sites so that they cannot be accessed from computers in the
local network. Furthermore, restrictions can be applied to a comprehensive and automatically-updated table of sites
to which access is not recommended.
 To block access to a Website:
1. Click the Website Restrictions link of the Firewall menu item under the Services tab.
Figure 54: Website Restrictions
2. Click the New Entry link. The Restricted Website screen appears.