User`s guide

MBR L13 – User’s Guide
29
Figure 27: MAC Filtering Settings
2. Enter the MAC address to be filtered and click the 'OK' button. The MAC address is added to the list.
Figure 28: MAC Filtering Table
3.6.2.4 Security Settings
The Wi-Fi security settings are defined under Security.
Figure 29: Security Section
 To configure the security settings:
1. Select the security type for the connection: None, Authentication Only, or Password Protected (WEP,
WPA, WPA2, or WPA and WPA2 combined).
2. If you selected WEP, define one or more encryption keys as follows:
Parameter
More Info
Active
Select the key you want to use at this time.
Encryption Key
Enter your encryption key.
Note: The pre-shared key is case-sensitive
Entry Method
Choose whether the encryption key you specified is an ASCII or
Hex value.
Key Length
Select the desired key length (40 or 104 bits).
3. If you selected WPA, WPA2, or WPA and WPA2, configure the other parameters as follows:
Parameter
More Info
Authentication Method
Select “Pre-Shared Key”.
Pre-Shared Key
Enter your encryption key. You can use either an ASCII or a Hex
value by selecting the value type in the drop-down menu
provided.
Note: The pre-shared key is case-sensitive
Encryption Algorithm
Select either Temporal Key Integrity Protocol (TKIP) or
Advanced Encryption Standard (AES).
Note: TKIP can be used in mixed 802.11g/n or 802.11b/g/n
modes.
Group Key Update Interval
Defines the time interval in seconds for updating a group key.