User`s guide

MBR L13 – User’s Guide
101
3.8.6 Maintenance
3.8.6.1 Configuration File
L13 enables you to view, save and load its configuration file in order to backup and restore your current configuration.
Access this feature either from the Maintenance tab under the System screen, or by clicking its icon in the Advanced
screen. The Configuration File screen appears.
Figure 133: Configuration File
Click the Upload Configuration File button to restore your configuration from a file and restart L13 (Administrator
Only).
Click the Download Configuration File button to back up your current configuration to a file.
3.8.6.2 Reboot
 To restart L13:
1. Access this feature either from the Maintenance tab under the System screen, or by clicking its icon in the
Advanced screen. The Restart screen appears:
Figure 134: Restart
2. Click OK to restart L13. This may take up to one minute.
3. To re-enter the WBM after restarting the gateway, click the browser’s Refresh button.
3.8.6.3 Restore Default Factory Settings
Restoring L13 default factory settings removes all of the configuration changes made to MBR. This is useful, for
example, when you wish to build a new network from scratch, or when you cannot recall changes made to the
network and wish to go back to the default configuration.
 To restore the factory settings:
1. Access this feature either from the Maintenance menu item under the System tab or by clicking its icon in
the Advanced screen. The Restore Defaults screen appears.