User guide

Configuring PCs

1553-ZAT 759 94 Uen A – October 2004

12 Click OK twice to confirm and save your changes, and then close the

Control Panel.

5.2.3 Windows Me

First, check for the IP protocol and, if necessary, install it:

1 In the Windows task bar, click the Start button, point to Settings, and

then click Control Panel.

2 Double-click the Network and Dial-up Connections icon.

3 In the Network and Dial-up Connections window, right-click the

Network icon, and then click the Properties button.

The Network Properties dialog box is displayed with a list of currently

installed network components. If the list includes Internet Protocol

(TCP/IP), then the protocol has already been enabled. Skip to step 11.

4 If Internet Protocol (TCP/IP) does not display as an installed

component, click the Add… button.

5 In the Select Network Component Type dialog box, select Protocol,

and then click the Add… button.

6 Select Microsoft in the Manufacturers box.

7 Select Internet Protocol (TCP/IP) in the Network Protocols list, and

then click OK .

You may be prompted to install files from your Windows Me installation

CD or other media. Follow the instructions to install the files.

8 If prompted, click OK to restart your computer with new settings.

Next, configure the PC to accept IP information assigned by the HM410dp:

9 In the Control Panel, double-click the Network and Dial-up

Connections icon.

10 In Network and Dial-up Connections window, right-click the Network

icon, and then click the Properties button.

11 In the Network Properties dialog box, select TCP/IP, and then click the

Properties button.

12 In the TCP/IP Settings dialog box, click the radio button labeled Server

assigned IP address. Also click the radio button labeled Server

assigned name server address.