User guide

Advanced Configuration
1553-ZAT 759 94 Uen A – October 2004
57
4.4.6 Save Config
The Advanced Setup > Save Config page allows you to save all current
configurations to non-volatile memory.
Most settings you apply on the pages in the configuration tool will take
effect immediately and be saved to non-volatile memory. In case a manual
save is necessary, this is noted in the graphical user interface as the
following example:
Notice: After <action> use Save Config to save it permanently.
Click the Save button to save all settings.
Note: Do not turn off your HM410dp while the configuration is being
saved.
A confirmation is shown when the configuration has been saved: