User guide

Advanced Configuration
1553-ZAT 759 94 Uen A – October 2004
55
4.4.4.4 Manual IP Setup
When running DHCP routed (MER) as access type you can manually
setup your Internet connection. Your ISP must then provide you with the
following information:
• The WAN IP address and subnet mask for your device.
• The Internet Gateway address.
• The primary and secondary DNS addresses.
To manually setup your Internet access, perform the following steps:
1 From the left hand Advanced Setup menu, click on Internet Access.
On the Internet Access page click the Static IP Setup link to display
the following page:
2 Click in each box and type the relevant address information provided
by your ISP and click the Confirm Changes button.
3 You will now return to the Internet Access page and your configuration
is complete.