User guide

Advanced Configuration
40 1553-ZAT 759 94 Uen A – October 2004
6 If you are happy with your application configuration, click the Confirm
Changes button. You will return to the Security: Enabled Applications
page containing details about the applications that are currently
enabled:
7 To disable an application, click the Disable an application here… link.
The following page is displayed:
8 Select the application you want to disable from the drop-down list and
click the Next> button. A confirmation page is displayed where you
click the Confirm Changes button.
4.4.2.5 Configuring Custom Applications
If you want to enable access to an application that does not appear on your
device’s default list, you can create a custom application.
In order to create a custom application, you must know:
1 The protocol used by the application (e.g. TCP, UDP and so on).
2 The primary port or range of ports used by the application.
3 Whether the application requires a trigger and if so, the secondary port
or range of ports used by the application.