User guide

Initial Configuration
14 1553-ZAT 759 94 Uen A – October 2004
4 Click the Confirm Changes button to save your Internet access
setting.
3.2.3 Bridged
By using this access type the HM410dp will act as a bridge, meaning that
the routing functionality (Firewall, NAT, UPnP, etc) will be disabled. This
access type is suitable if you only want to connect a single computer to the
Internet and want to perform all special functionality in the computer instead
of the built-in capabilities of the HM410dp. This access type is “Always on”
meaning that you is automatically connected to your ISP whenever you use
your Internet connection.
Note: If your ISP uses PPPoE you must have a PPPoE client software
installed on your PC.
To configure the HM410dp for Bridged access type, follow the steps below:
1 From the Start page, click the Configuration Wizard > button to display
the following page:
2 Select Bridged and click the Next> button. The Confirm page for
Internet access appears: