User guide

Initial Configuration
12 1553-ZAT 759 94 Uen A – October 2004
3.2.1 DHCP Routed (MER)
The DHCP Routed (MER) access type means that the HM410dp operates
as a bridge to the WAN while simultaneously operating as a router to the
LAN.
This access type is “Always on” meaning that you is automatically
connected to your ISP whenever you use your Internet connection. The
HM410dp automatically activates the NAT service and its internal DHCP
server. PCs on the LAN will be assigned private IP addresses from the
built-in DHCP server and the NAT service will route the traffic to/from the
WAN.
To configure the HM410dp for DHCP Routed (MER) access type, follow the
steps below:
1 From the Start page, click the Configuration Wizard > button to display
the following page:
2 Select DHCP routed (MER) and click the Next> button. The Confirm
page for Internet access appears:
3 Click the Confirm Changes button to save your Internet access
setting.
3.2.2 PPPoE Routed
The PPPoE (or dial-up) access type is used by the ISP to identify users and
allow them access to the Internet. You have to enter a valid Username and