User guide

Hardware Description and Installation

1553-ZAT 759 94 Uen A – October 2004

2.4 Installation

Follow the procedure below to make the physical cable connections to the

HM410dp. Figure 5 shows an installation example that can be used as a

reference.

Figure 5 - HM410dp Installation Example

1 Connect the ADSL Line

Connect one end of the provided ADSL Line cable to the ADSL port

on the HM410dp. Connect the other end to your ADSL service port

(splitter/filter or phone outlet).

2 Connect Ethernet device(s)

Attach the provided Ethernet cable to one of the ports marked

Ethernet on the HM410dp.

Connect the other end to an Ethernet port on a PC, Set-Top Box, IP

telephone or Ethernet switch/hub. You can simultaneously use as

many cables and ports that you need depending on available services

and devices.