User guide

Trouble shooting
EN/LZT1083982 R4 73 (87)
2000-12-07
5 Select the IP Address tab and select Specify and IP address.
6 Enter the IP address and Subnet mask and click on OK.
7 You are now back in the "Network" dialog box. Click OK.
8 Close the Control Panel window.
9 Some configuration files might be copied onto your hard disk and if a "Setting
Changes" message asks you if you wish to restart your computer you should answer
Yes.
Installation using USB in Windows 2000:
1 From the Start menu select Settings -> Control Panel.
2 Double click on the Network and Dial-up Connections. A new view appears
including icons for Local Area Connections.
3 Double click the Local Area Connection icon for the Ericsson HM220d Virtual
NIC driver. If you have several icons be sure you choose the right one. The "Local
Area Connection Status" dialog box appears.
4 Click the Properties button to open the "Local Area Connection Properties" dialog
box:
Figur 68: Local Area Connection Properties
5 Select "Internet Protocol (TCP/IP)" according to the above example.
6 Click the Properties button and the "Internet Protocol (TCP/IP) Properties" dialog
box will appear.
7 Select "Specify and IP address" and enter the IP addresses specified by your
ISP/service provider. Click OK.
8 You are now back in the "Local Area Connection Properties" dialog box. Click OK.