User guide

Configuring the modem
58 (87) EN/LZT1083982 R4
2000-12-07
Status message
Figur 56: Configuration wizard - Status message
• Click the Reboot button.
The wizard will now close and the modem is rebooting. This will take approximately one
minute.
When the Power, Ethernet or USB (depending on which connection is used), and ADSL
LEDs have turned solid yellow, the modem is ready for operation.
5.4 Change configuration
If you want to change your modem configuration, just access the modem's web pages
again by starting your web browser and enter the IP address of the modem
http://192.168.254.254 in the "Location" or "Address" area where you enter web page
addresses.
Figur 57: Enter the IP address of the modem
The HM220d ADSL modem's "Welcome" page appears.