User guide

Installation using USB (for Windows 98 PCs)
EN/LZT1083982 R4 23 (87)
2000-12-07
By following the next steps you can verify that your PC now has got a new IP address
from the modem's DHCP server.
Check IP configuration:
1 From the Start menu select Run... .
2 Type winipcfg and click OK. The "IP Configuration" dialog box appears:
Figur 18: IP Configuration dialog box
3 From the scroll down menu at the top, select the "Virata Virtual Bus Ethernet driver"
according to the above example.
4 Verify that the "IP Address" is within the range 192.168.254.1 to 192.168.254.253.
5 If the "IP Address" field is empty or not within the specified range, click the
Release All button and then the Renew All button. Verify the "IP Address" again
according to step 4.
6 Click OK to close the "IP Configuration" dialog box.
You are now ready to configure your modem as described in chapter 5 - Configuring the
modem.