User guide

Administration Tasks
72 (98) EN/LZT 108 6492 R1
April 2003
Figure 56: User Config - Add
4 After making changes, click the Submit button.
5 Select Admin > Commit & Reboot and click Commit to save your changes to
permanent storage.
12.3 Image Upgrade
This option allows you to upgrade the HM210dp/di to new firmware. After upgrading,
your customized configuration will still exist and not be reset to the factory defaults.
To perform the upgrade task, download the required firmware file to your host PC and
follow the steps below:
Select Admin > Local Image Upgrade to view the Local Image Upgrade page:
Figure 57: Local Image Upgrade page
1 Click Browse to locate the firmware file.
The name of the upgrade file must be one of the following:
TEImage.bin, TEDsl.gsz, TEAppl.gsz, Filesys.bin, TEPatch.bin