User guide

Firewall Configuration
EN/LZT 108 6492 R1 59 (98)
April 2003
Field Description
E-mail ID of Admin 1/2/3 Specifies the e-mail address(es) of the administrator(s) who
should receive notices of any attempted firewall violations.
Type the address(es) in standard internet e-mail address
format, e.g. [e-mail]
The e-mail message will contain the time of the violation, the
source address of the computer responsible for the violation,
the destination IP address, the protocol being used, the source
and destination ports, and the number of violations occurring
the previous 30 minutes. If the ICMP protocol were being used,
then instead of the source and destination ports, the e-mail will
report the ICMP code and type.
3 Click the Submit button.
4 Select Admin > Commit & Reboot and click Commit to save your changes to
permanent storage.