User guide

DHCP Configuration
38 (98) EN/LZT 108 6492 R1
April 2003
7.3.2 Enabling DHCP Relay Mode
1 Select LAN > DHCP Mode and from the "DHCP Mode" drop-down list select
DHCP Relay. Click the Submit button.
A page appears to confirm the change.
2 Select Admin > Commit & Reboot and click Commit to save your changes to
permanent storage.
7.3.3 Configuring Your PCs as DHCP Clients
For each computer that you want to configure to receive IP information automatically,
configure the TCP/IP properties to "Obtain an IP address automatically" (the actual
text may vary depending on your operating system). Refer to section 3.1 -
"Configuring your PCs as DHCP Clients" for detailed instructions.