User guide

DHCP Configuration
EN/LZT 108 6492 R1 37 (98)
April 2003
• Exclude IP addresses within its range from distribution. To exclude an IP address,
enter it in the field provided and click Add.
If you want to change other attributes, you must delete the pool and create a new one.
After entering your changes, click theSubmit button.
Select Admin > Commit & Reboot and click Commit to save your changes to
permanent storage.
7.2.5 Viewing Current DHCP Address Assignments
To view a table of all current IP address assignments, select LAN > DHCP Server >
Address Table.
7.3 Configuring DHCP Relay
7.3.1 Defining the DHCP Relay Interface(s)
1 Select LAN > DHCP Relay. The DHCP Relay Configuration page appears:
Figure 30: DHCP Relay Configuration page
This page provides a text box for entering the IP address of your ISP's DHCP
server and a table that lists the interfaces on your HM210dp/di that can relay
DHCP information.
2 Type the IP address of your ISP's DHCP server in the fields provided.
If you do not have this address, it is not essential to enter it. Requests for IP
information from your LAN will be passed to the default gateway, which should
route the request appropriately.
3 If the interface named eth-0 is not already displaying, select it from the
drop-down list and click Add.
4 Click the Submit button. A page appears to confirm your changes.