User guide

Configuring IP Routes
EN/LZT 108 6492 R1 33 (98)
April 2003
6.2 Adding IP Routes
1 Select Routing > IP Route > Add. The IP Route - Add page appears:
Figure 26: IP Route - Add
2 Specify the destination, network mask, and gateway or next hop for this route.
To create a route that defines the default gateway for your LAN, enter 0.0.0.0 in
both the Destination and Netmask fields. Enter your ISP's IP address in the
Gateway/NextHop field.
Note:
You cannot specify the interface name, route type or
route origin. These parameters are used only for
routes that are identified automatically as the device
communicates with other routing devices. For routes
you create, the routing table displays system default
values in these fields.
3 Click the Submit button. The IP Routing Table will now display the new route.
4 Select Admin > Commit & Reboot and click Commit to save your changes to
permanent storage.