User guide

Basic Configuration
EN/LZT 108 6492 R1 31 (98)
April 2003
Figure 22: IPoA Configuration
3 Mapping IPoA interface to a lower interface:
In the IPoA Configuration table, locate the new IPoA entry and click Map in the
"Action" column.
Figure 23: IPoA Interface - Map
On IPoA Interface - Map page, from the drop-down list select the ATM VC
you created in step 1 to be mapped to this IPoA interface and then click Add.
Click Close to exit the confirmation page.
5.3.2 Check Your Connection Status
Select Home > System Mode. The WAN Interface item should display the interface
you created to communicate with your ISP. A green ball in the Status field indicates a
successful connection.
Figure 24: WAN IF Status
5.3.3 Configuring the PC
Keep your PC's setting as a DHCP client. No further configuration is required.