User guide

Basic Configuration
EN/LZT 108 6492 R1 29 (98)
April 2003
Figure 19: ATM VC - Add
b Enter the provided fields as below:
Field Description
VC Interface Select a VC interfacce from the available interfaces, e.g.
aal5-0 .
VPI/VCI Enter the VPI/VCI values given by your ISP, e.g. 0/34
Mux Type Select LLC or VC as required by your ISP.
Max Proto per AAL5 Keep the default 2.
After entering the fields above, click Submit.
c When the confirmation page appears, click Close.
d You will return to the ATM VC Configuration table and see the newly
added ATM VC entry.
Figure 20: ATM VC Configuration
2 Creating a IPoA interface:
a Select WAN > IPoA > Add to add a new IPoA interface: