User guide

Basic Configuration

EN/LZT 108 6492 R1 27 (98)

April 2003

Field Description

PPP Interface Select a PPP interface from the available interfaces, e.g.

ppp-0 .

ATM VC Select the ATM VC you created in step 1, e.g. aal5-0 .

IPF Type

Public

Status Select Start or StartOnData

Start - To establish connection whenever you turn on the

HM210dp/di.

StartOnData - To establish a connection whenever the device

gets a request to connect to the Internet, such as when you open

a browser requesting for web pages.

Protocol PPPoA or PPPoE as required by your ISP.

Service Name For PPPoA no need to set up.

For PPPoE enter the Service Name if this is required by your

ISP. Otherwise leave it blank.

Use DHCP Select Disable unless your ISP instructs you to enable this

service.

Use DNS

Enable

Default Route

Enable

Security Protocol Select PAP or CHAP as required by your ISP.

Note that characters of colon (:), semicolon (;) and question

mark (?) are not allowed when entering login name and

password.

After entering the fields above, click Submit.

c You will return to the PPP Configuration page and see the new PPP

interface. The "Oper. Status" column indicates if the link is currently up or

down.