User guide

Basic Configuration
EN/LZT 108 6492 R1 25 (98)
April 2003
• Option 2: Your client use PPPoE software to connect to your ISP.
Just keep your PC's setting as a DHCP client and execute the PPPoE software to
make the connection.
5.2 PPP Connection Mode
5.2.1 Configuring the HM210dp/di
1 Creating an ATM VC interface:
a Select Routing > ATM VC > Add. The ATM VC - Add page appears:
Figure 14: ATM VC - Add
b Enter the provided fields as below:
Field Description
VC Interface Select a VC interface from the available interfaces, e.g. aal5-0 .
VPI and VCI Enter the VPI/VCI values given by your ISP, e.g. 0/33
Mux Type For PPPoE, select LLC
For PPPoA, select VC.
Max Proto per AAL5 Keep the default 2.
After entering the fields above, click the Submit button.
c When the confirmation page appears, click Close.
d You will return to the ATM VC Configuration table and see the newly
added ATM VC entry.