User guide

Basic Configuration
24 (98) EN/LZT 108 6492 R1
April 2003
Figure 12: LAN Configuration
5 Commit your changes:
Select Admin > Commit & Reboot and click Commit to store your changes to
permanent memory.
5.1.2 Check Your Connection Status
Select Home > System Mode. The WAN Interface item should display the interface
you created to communicate with your ISP. A green ball in the Status field indicates a
successful connection.
Figure 13: WAN IF Status
5.1.3 Configuring the PC
• Option 1: Your PC uses the IP information given by your ISP.
If this is the case, configure your PC to use the static IP information given by your
ISP, for example:
IP address: 10.100.16.2
Subnet mask: 255.255.255.0
Default gateway: 10.100.16.254
NOTE! With the configuration above, your PC should be able to access the
Internet now but will lose the local connection to the device's LAN port. If you
want to configure the HM210dp/di via the Configuration Manager again, you
should re-configure the PC to 192.168.1.x to be in the same subnet of the
device's LAN port.