User guide

Basic Configuration
EN/LZT 108 6492 R1 23 (98)
April 2003
Figure 11: RFC1483/Ethernet over ATM(EoA) Config
3 Enable Bridging function:
a Select Bridging > Bridging page to display the Bridge Configuration page.
b Select eth-0 from the list and click Add.
c Select the EOA interface to be used (e.g. eoa-0 ) from the drop-down list, and
then click Add.
d Set the Bridging item to Enable and click Submit. A confirmation page
appears to confirm your changes.
4 LAN configuration:
a Select Bridging > LAN Config.
b Don't modify the settings; just keep the default as shown in the figure below: