User guide

Basic Configuration
22 (98) EN/LZT 108 6492 R1
April 2003
Figure 10: EOA Interface - Add
b Enter the provided fields as below:
Field Description
EOA Interface Select an EoA interface from the available interfaces, e.g.
eoa-0 .
Interface Sec Type
Public
Lower Interface Select the ATM VC interface you created in Step 1, e.g.
aal5-0 .
Config. IP Address/Net Mask
0.0.0.0 / 0.0.0.0
To use the HM210dp/di as a bridge, you don't need to set the
IP address and subnet mask. Just keep the default.
Use DHCP
Disable
Default Route
Disable
Gateway IP Address Leave it empty. You don't need to set the gateway.
After entering the fields above, click the Submit button.
c When the confirmation page appears, click Close.
d You will return to the EOA table and see the newly added EOA entry.