User guide

GDC-500H Wireless Handset
User Guide


 Note:
Use only the adapter provided with the unit. Use of a different adapter could
damage the unit or cause a fire and will invalidate your warranty. It is not
available to charge using USB port of PC.
Installing the Belt Clip
The GDC-500H comes with a belt clip that can be installed on the unit. To install the belt clip,
refer to the figure and instructions below.
When installing the belt clip:
1. Turn the screw clockwise on the back of the unit.
2. The belt clip is pulled upward until the screw is inserted into the hole securely.
When uninstalling the belt clip:
1. The belt clip is pulled down with pushing the button of the belt clip until the lock is
open.
GDC-500H Display
The GDC-500H has a large 176 x 220 pixel full-color TFT LCD (Liquid Crystal Display). The
display indicates the status of the handset and provides visual feedback for dialing and other
actions. Various icons, detailed in the chart below, are shown at the top of the display. The
central area of the display shows messages from the host LG-Ericsson system and the
phone itself. At the bottom are selections for the Left and Right soft buttons.