Ericsson G30 / G35 Fixed Wireless Terminal for GSM Mobile Networks User Guide E EN-LZT 151 233 FWT User ...
EN/LZT 151 233 R1D © Ericsson AB 2006 – All Rights Reserved EN-LZT 151 233 FWT User ...
Table of Contents Table of Contents ........................................ 3 Welcome ..................................................... 4 Fixed Wireless Terminal................................ 6 Installation ................................................... 9 Connecting Devices to the FWT................. 15 Advanced Features.................................... 20 Troubleshooting......................................... 29 Technical Data........................................... 33 Accessories ...
Welcome Welcome to the User Guide for the G30 / G35 Fixed Wireless Terminal. Important information: Some of the services described in this guide might not be supported by all networks. Please, contact your network operator for information on different network services operational in your GSM network. The latest version of this user guide can be downloaded from: http://www.ericsson.com/enterprise/library/manual.shtml Disposal of the product Your product should not be placed in municipal waste.
Warranty ERICSSON MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Ericsson shall not be liable for errors contained herein nor for incidental or consequential damages in connection with the furnishing, performance or use of this material.
Fixed Wireless Terminal Product Description The FWT is a flexible and cost-effective solution for connection to the wireless GSM network when there is no fixed line infrastructure or if you need additional telephone lines. The G35 can also be connected to a PBX so you can benefit from the Least Cost Routing (LCR) capabilities offered by most PBX vendors to optimize your costs by routing outgoing calls to mobile phones through the GSM network.
Supplied Parts After unpacking, please check that the following parts and list of components are included: List of Components 1. FWT unit 2. Antenna 3. 4 x mounting screws 4. Power cable (USA, UK, EU or AUS) 5. AC/DC adapter 6. Wall mount bracket 7. Telephone cable 8.
External Connector and Indicators 8 Fixed Wireless Terminal: G30 & G35
Installation SIM Card Your network operator provides you with a SIM (Subscriber Identity Module) card. The SIM card contains information about your telephone number and the services included in your subscription. Preparing Your FWT You need to follow these steps before you install the FWT on the wall and finalize all connections. Warning: The FWT should be switched off before inserting or removing your SIM card or connecting any devices to the FWT. Assembly 1. Connect the antenna.
2. Remove the front cover, by pressing down and pushing the small tab that is in the center of the bottom part of the FWT. Open the SIM Card holder and insert the SIM Card. 3. Close the SIM Card holder, placing it horizontally and securing it with the sliding part of the holder. 4. Install the battery (optional) in the battery compartment (over the SIM Card). To do so, connect the battery cable to the FWT connector.
Switch on the FWT Connect the power supply. The FWT switches on automatically and the LED indicators start flashing. Note: If the Power LED is off, there is a problem with the power supply. Please refer to the topic Troubleshooting documented on page 29 for more detailed information. Enter PIN Most SIM cards are protected with a PIN (Personal Identity Number), which you get from your network operator and which you need in order to access the network.
Note: If the Radio LED is off, you do not have access to the GSM network at your present location. Now you have prepared the FWT for wall installation. Please, follow the instructions below for complete wall installation. Installing the FWT on the Wall FWT Location The GSM signal strength available at the FWT location affects the performance of the unit. The stronger the GSM signal, the better the FWT performance. Tip: Test several potential locations by moving the FWT while looking at the Radio LED.
Wall mounting Please proceed as indicated in the following picture. 1. Fix the wall-mounting bracket on the wall. 1. Press the FWT against the wall-mounting bracket. 3. Slide the FWT downwards. Warning: Once you have fixed the FWT to the wall and switched it on, check the final status of the LEDs. If either one is off, then there is a problem with the power supply or the GSM signal.
Now the FWT is ready for connecting devices and making calls. Note: If you want to remove the FWT from the wall bracket, then you have to press the tab (step 1) as indicated in the following picture and then slide the FWT upwards (step 2).
Connecting Devices to the FWT Warning: Before you start any connections please refer to the topic Product Care and Safety documented on page 38 for more detailed information and contact your network operator if you have any questions. Warning: To ensure good protection against electrical discharges and the best audio quality, proper grounding of the power supply is strongly recommended.
Note: When making the connections, the two-wire telephone cable polarity does not matter. Tip: If your home or company is already wired with telephone cable, you only need to connect the cable to the FWT RJ11 connector and your telephone line will be up and running in all rooms. Note: The telephone wire must be installed indoors. Note: The telephone wire should not exceed 600 meters.
Warning: In order to avoid GSM interferences (noise), place the FWT at least three (3) meters (horizontal) away from electronic devices, including the telephone equipment connected to the FWT, or other household electronic devices such as televisions or radio receivers. The difference in height should be at least 2 meters (vertical). This is not necessary if you use telephone devices that fulfill the Immunity Characteristics settled by the IEC CISPR-24 standard.
• The PBX can be programmed to utilize Least Cost Routing (LCR), if available, to automatically choose the trunk where the G35 FWT is connected. • If the PBX does not offer LCR, choose the trunk where the FWT is connected manually with a special dialed prefix. Check the installation in the same way as before. The G35 FWT is compatible with most analog PBXs on the market.
If the PBX does not offer the LCR option, choose the FWT trunk manually with a specific prefix. Check the installation in the same way as before. If you encounter problems, contact your distributor or network operator. Warning: The PBX may require specific programming: both programming and installation should be done by specialized service personnel. Using telephones Telephones connected to the FWT work in the same way as if they were connected to a fixed line network.
Advanced Features If a DTMF telephone is connected to the FWT, the following features can be accessed. Changing Volume During a call, you can increase or decrease the reception volume level. • Increase volume: dial R#### • Decrease volume: dial R**** Call Divert You can divert incoming calls to another phone number when you are unable to answer. The following table shows the divert alternatives as well as the way to proceed to manage this function.
To manage diversion of calls ... With function ... Dial ... You will hear ...
To manage restrictions of calls ... With function ... Dial ... You will hear ...
Call waiting service If you wish to be able to receive a second call while another call is in progress, you must turn on the call waiting service. Note: These dialing sequences may vary depending on your network operator. If these do not work, please consult your network operator or check the user guide provided with your subscription. To manage call waiting function ... All outgoing calls With function ... Dial ... You will hear ...
• To put the ongoing call on hold and answer the waiting call: press R2. You can switch again between both calls by pressing R2 each time. Note: If “divert when busy” is on, the waiting call is diverted to the number you have specified. Conference Calls In a conference call, you can have a joint conversation with up to four other participants. To create a conference call • If you are in conversation with participant 1, put it on hold (press R), and dial participant 2.
Phonebook / Abbreviated Dialing You can store telephone numbers in either the SIM card memory or the FWT memory. Up to 99 telephone numbers can be stored in each of them. The following table shows how to manage the phonebook with the 99 memory positions (Pos). Warning: The position must always consist of two digits. For example, memory position number 1 has Pos=01 To manage the phone book in ... With function ... Dial ... You will hear ...
Sending Tone Signals During a call, you can press keys 0-9, * and # to perform interactive services, for example banking by phone or control of an answering machine. Minute Minder If the minute minder is activated, you hear a beep once every minute during a call as a reminder of the duration of the ongoing call. To manage minute minder function ... Dial ... You will hear ...
To manage alternate line service function ... Dial ... You will hear ... Activate Line 1 **591# 1 beep Activate Line 2 #592# 3 beeps Check status Line 1 *#591# 1 beep if activated 3 beeps if deactivated Check status Line 2 *#592# 1 beep if activated 3 beeps if deactivated Note: If instead of hearing beeps you hear a deep tone, this means that there has been an error in the activation or deactivation. SIM Card Security To Manage your SIM Card Most SIM cards are locked at the time of purchase.
To Unblock your SIM Card To unblock your SIM card, you need to enter your PUK (Personal Unblocking Key), which can be supplied by your network operator. The procedure to enter the PUK is exactly the same as for entering the PIN. Note: If you enter the wrong PUK ten times in a row, your card will be permanently blocked. If this happens, you should contact your network operator.
Troubleshooting This chapter describes the procedures to identify and, if possible, correct problems that might occur with the FWT or its installation. Some problems require that you call your network operator, but most problems you may encounter can be easily corrected.
The Power LED (red and green) indicates the FWT power supply status: Color Power supply situation Green Power supply in ON (AC adapter) Red The FWT is powered from the battery back-up OFF Power is OFF When both LEDs are flashing simultaneously, it means that the FWT is under alarm conditions. In this situation, ONLY EMERGENCY CALLS can be made.
LED indicators status If you see… It means… Do this… Power LED Green Radio LED ON or flashing AC power is ON. The FWT is connected to the cellular network and available for use. Normal operation mode Start using your FWT. If Radio LED is flashing, Please refer to the topic FWT Location on page 12. If you are unable to make a call, check the telephone cable connection or the PBX connections and program. AC Power is OFF Verify that the AC power plug is securely connected to the AC power outlet.
Audible Tones The FWT generates audible tones in your telephone set, thus providing the same service characteristics as the one given by the traditional fixed line network. The following table describes the nature of the main tones you will get when using the unit. Other standard call progress tones, such as busy tone, number obtainable or ring back tone, are provided directly by the network. Note: Some tones can vary depending on your network operator. 32 Tone Name Nature It means ...
Technical Data GSM Air Interface Frequency Bands: GSM 850/1900 or GSM 900/1800. GSM 850 Frequencies: TX 824-849 MHz, RX 869-915MHz RF power: Maximum 2 W (30 dBm) Power class 4 GSM 900 Frequencies: TX 880-915 MHz, RX 925-960 MHz RF power: Maximum 2 W (33 dBm) Power class 4 GSM 1800 Frequencies: RF power: TX 1710-1785 MHz, RX 1805-1880 MHz Maximum 1 W (30 dBm) Power class 1 GSM 1900 Frequencies: TX 1850-1910 MHz, RX 1930-1990 MHz.
FWT Interfaces Basic Kit The Basic Kit consists of: FWT unit, power supply, mains cable, wallmount bracket, antenna, Quick Guide and User Guide manuals and telephone cable. • Size: Height 148 mm, Width 165 mm • Depth: 45 mm • Weight: 310 grams • SIM card: Small plug-in card, 1.8V or 3V type Telephone Interfaces • Telephones: RJ11 (a/b 2-wire line); telephone interface • CLI: ETSI DTMF and V.
Power Supply • Power Input VDC: 7.5 VDC; 0.
Accessories The G3x series FWT benefits from a wide range of accessories, which ensure the best and easiest way to install, serve and maintain the FWT, enhancing their functionality. Only these, approved-by-Ericsson, accessories will guarantee the quality and performance of the FWT. Battery The FWT can be installed with a backup battery: • Rechargeable lead-acid battery: 6V, 1.2-1.3 Ah with 2.5 hours continuous conversation, 13.5 hours stand-by.
Mechanical Antitheft Lock The mechanical lock serves as an anti-theft device. It fits into the wall mounting bracket; the FWT is then installed onto the wall mounting bracket as normal. The mechanical lock prevents removal of the FWT from the wall mounting bracket. The FWT can be removed by using the Mechanical Key Mechanical Antitheft Key The mechanical key is used to “unlock” the FWT in cases of the mechanical lock being used.
Product Care and Safety Note: Please read this information before using your FWT. Save this User Guide since it contains important safety information and operating instructions. Product care 38 • Treat your product with care. Keep it in a clean and dust-free place. • Do not expose your FWT to liquid or moisture or high humidity. • Do not expose your FWT to extreme high or low temperatures; refer to the topic Technical Data documented on page 33 for more detailed information.
Antenna safety and care • Use only an antenna that has been specifically designed and approved for your FWT. Use of unauthorized antennas, modifications, or attachments could damage the FWT and may violate the appropriate regulations, causing loss of performance and radio frequency (RF) energy above the recommended limits. • Do not hold or touch the antenna when the FWT is in use. • Do not use the FWT if the antenna or antenna cable is damaged or missing.
Personal medical devices Radio waves may affect the operation of cardiac pacemakers and other implanted equipment. If a minimum distance of 15 cm is kept between the antenna and the pacemaker, the risk of interference is limited. If you have any reason to suspect that interference is taking place, immediately move away from the antenna. Contact your cardiologist for more information. For other medical devices, please consult the manufacturer of the device.
Battery information Warning: When a battery is not installed or is connected to a terminal that is switched off, it should be recharged during 24 hours every 6 months. • Do not expose the battery to extreme temperatures, never above +60°C. For maximum battery capacity, use the battery in room temperature. • Do not let the metal contacts on the battery touch another metal object. This could short-circuit and damage the battery. • Do not expose the battery to open flames.
Warranty Limited Warranty Thank you for purchasing this Ericsson Product. To get the maximum use out of your new product, we recommend that you follow a few simple steps: • Read the Guidelines for safe and efficient use. • Read all of the terms and conditions of the Ericsson Warranty listed below. • Save your original receipt, this is necessary for warranty repair claims.
For efficiency purposes, Customers are reminded that should their Ericsson Product need warranty service, they return it to the dealer from which it was purchased or call their local Ericsson helpdesk for further information on warranty claims. Conditions 1. The warranty given herein is only valid if the original receipt issued by the dealer to the original purchaser, specifying the date of purchase and serial number, is presented along with the Product to be replaced.
tion of the duration of implied warranties, so the preceding limitations or exclusions may not be applicable in certain cases. This warranty gives specific legal rights, and depending on the country, other rights may be available as well.
Glossary The following definitions are supplied in order to better understand certain concepts included in this manual: B-number The B-number refers to the number that you dial. It is also commonly referred to as destination number, called number, called party number. Fixed Line Devices Any analog devices that can be connected to the analog fixed line: • Fixed Telephones- ordinary telephones for a fixed line. • G3 Faxes- ordinary fax machines available on the market.
PUK Personal Unblocking Key. This is the number you get from your network operator and which is used to unblock your SIM card if an incorrect PIN has been entered three times in a row. SIM Subscriber Identity Module. SIM card provided by your network operator, you need to insert in your GSM FWT in order to make and receive calls. It contains all the information from your subscription characteristic. Switch-off Power down the FWT by disconnecting the AC power supply or removing the battery.
Index E A Abbreviated Dialing, 24 Accessing the battery compartment, 41 Accessories, 36 Advanced Features, 20 Alternate Line Service (ALS), 26 Antenna care, 38 Assembly, 9 Audible Tones, 32 B Basic Kit, 34 Battery, 37 Battery Cable, 37 Battery information, 40 C Call Barring, 21 Call Divert, 20 Call Restriction, 21 Call waiting service, 23 Changing Volume, 20 Checking the connections, 16 Checking the quality of the calls, 16 Children, 40 Conditions, 43 Conference Calls, 24 Connecting a telephone to the FWT
N Network Search, 11 P Personal medical devices, 39 Phonebook, 24 Potential explosive atmospheres, 40 Power supply, 35, 40 Preparing Your FWT, 9 Product care, 38 Product Care and Safety, 38 Product Description, 6 R Radio wave exposure information, 39 Receiving a Second Call, 23 S Sending Tone Signals, 25 SIM Card, 9 SIM Card Security, 27 Supplied Parts, 7 Switch on the FWT, 11 T Technical Data, 33 Telephone Interfaces, 34 To Change your PIN, 27 To Manage your SIM Card, 27 To Unblock your SIM Card, 27 Tr
EN-LZT 151 233 FWT User ...
Ericsson is shaping the future of Mobile and Broadband Internet communications through its continuous technology leadership. Providing innovative solutions in more than 140 countries, Ericsson is helping to create the most powerful communication companies in the world. Ericsson Enterprise AB All rights reserved. For questions regarding the product, Please contact your Ericsson Enterprise Certified Sales Partner. Also visit us on http://www.ericsson.com/enterprise EN-LZT 151 233 FWT User ...
