User guide

DT690
14.2.6 Call a telephone number included in a Message
If the sender has written a telephone number in the message, it is possible to
call this number without dialing it. Do the following:
1. Press Menu select Messaging, and press Select.
2. Select Inbox, and press Select.
3. Select a message, and press View.
4. Press More.
5. Scroll to Call (No. in text), and press Select.
6. Press Call.
14.2.7 Save number from a Message
To save a number from a message, do the following:
1. Press Menu, select Messaging, and press Select.
2. Select Inbox, and press Select.
3. Select a message, and press View.
4. Press More and select Save number.
5. Select Work number, Mobile number or Other
number, and press Select.
6. Select Name, and press Add.
7. Enter a name and press OK.
8. Press Back.
The number will be saved in the contact list.
14.3 Write and Send a Message (SMS)
To write and send a m essage, do the following:
1. Press Menu, select Messaging, and press Select.
2. Select Write new message, and press Select.
3. Write the message and press Send.
Note: The maximum message length is 160 characters (Keys 0-9, * or
# c an be used. Keys 0 and 1 contains special characters, see
Section 8.1.3 on page 48 to see all characters). Some characters
require 2 bytes in the final message, therefore the user will
sometimes not be able to enter 160 characters.
80
1424-EN/LZT 103 088 Ue n A2 2008-11-21