User guide

DT690
11.7.2 Resume on Another Extension
To resume the call on a nother extension:
1. Call the extension where the call was put on hold and press
.
2. Press 8.
Note: France and New Zealand, press 4; Sweden, press 6.
11.8 Call Wa iting
Note: The Call Waiting function might be blocked for use on your extension.
This is programmed via the Desk PDM/CPDM by your system
administrator.
If you hear the Call Waiting tone during an ongoing conversation, another
person is trying to contact you. To answer the call, do the following:
1. Press R and
.
The ongoing call is put on hold and your phone rings to announce the waiting
call.
Note: R is default for this function. If this soft key is reprogrammed to
something other than R, this function is disabled.
2. Press
.
3. Press
to finish the call.
Wait for the system to recall the first party.
To terminate the ongoing call and answer the waiting c all:
1. Press
to finish the ongoing call.
The waiting call is signalled on your phone
2. Press
to answer the new call.
11.9 Conference
With the conference function, up to seven parties can be included in a
conference. Only the conference leader (that is, the person initiating the
conference) can admit participants. During the conference a tone will be heard
every 15 seconds.
Note: This feature needs to be programmed via the Desk PDM/CPDM.
Please contact your system administrator.
When having an ongoing conversation and wanting to establish a telephone
conference, do the following:
62
1424-EN/LZT 103 088 Ue n A2 2008-11-21