User guide

Connections
18.2.2 Subscribe to a New System
Your DT690 cordless phone can subscribe to up to eight different cordless
systems. To subscribe a new system, you will need the Portable Access Right
Key (PARK) and Authentication code (AC) related to the system you are going
to log on to. To retrieve this information, contact your system administrator. To
subscribe to a new system, do the following:
1. Press Menu, select Connections, and press Select.
2. Select Systems, and press Select.
3. Select Subscribe, and press Select.
4. Enter the system name and press Next.
5. Enter the PARK code.
6. Enter the AC code and press Next.
Protection on? is displayed.
7. Select Yes, if the new system is to be protected, or No if the new system
is not to be protected.
Note: It is not possible to delete a protected subscription.
8. Press OK.
A searching mode starts.
18.2.3 Unsubscribe System
To unsubscribe from a system, do the following:
1. Press Menu, select Connections, and press Select.
2. Navigate to System, and press Select.
3. Select Unsubscribe, and press Select.
4. Select system to unsubscribe, and press Select.
A control question whether to unsubscribe or not is asked, press Yes to confirm.
Note: It is not possible to delete a protected subscription from the System
menu. Contact your system administrator if you need to delete a
protected subscription.
18.2.4 Rename System
It is possible to change the name of the system in the telephone.
To rename a system, do the following:
1. Press Menu, select Connections, and press Select.
101
1424-EN/LZT 103 088 Uen A2 2008-11-21