User guide

DT690
The phone searches for a Bluetooth headset to connect to.
5. When headset is found, press Pair.
6. Enter PIN code. (See User manual for the Bluetooth headset).
7. Press OK.
Successful pairing is displayed if the pairing mode was successful.
When a Bluetooth headset is connected,
is displayed.
18.2 System
Your DT690 cordless phone supports GAP/CAP standard. Only available
systems are displayed.
18.2.1 Select System
To select a system, do the following:
1. Press Menu, select Connections, and press Select.
2. Select System, and press Select.
3. Select Change system, and press Select.
4. Select Automatically (or a specific system from the list), and press Select.
If the phone is set to Automatically, a system will be selected according
to the priority list.
18.2.1.1 Priority
The default order of priority is the order of entered subscriptions. This means
that the first subscribed system has the highest priority. This list can be edited
by the user. It is possible to set the systems in priority by moving them up or
down in the list. It is also possible to get priority information by selecting Info.
1. Press Menu, select Connections, and press Select.
2. Select System, and press Select.
3. Select Priority, and press Select.
4. Change the priority if needed by selecting Up or Down.
5. Press Back to save.
100
1424-EN/LZT 103 088 Ue n A2 2008-11-21