User guide

Outgoing Calls
12 Outgoing Calls
If you make a call but the person is not available, the following functions will
help you to establish contact with the called party.
To make a c all through the phonebook, see Section 16 on page 87.
12.1 Pre-dial
To use pre-dial:
1. Enter the number and press
to get the line.
The number is shown on the display while dialling.
2. If needed, press Clear to erase a digit.
By using the navigation key, it is possible to step and add or delete a digit
in the middle of a number.
12.2 Dial Using a Pre-programm ed Hot key or Soft key
A Hot key can be programmed to give access to frequently used functions such
as dialling a specific telephone number, a shortcut on the menu, or sending an
SMS. Any key "0", "2" - "9" can be set to a Hot Key. A l ong press on any of
these digits in standby mode are by default a shortcut to the Call contact list.
Press the pre-programmed Hot key, Soft key or multifunction button to dial the
number. The call will automatically be connected.
12.3 Dialling a Number from the Call List
The 25 last received, dialled and missed phone numbers are stored in the Call
list. If Clock and Date function is set, it is possible to see the time for the calls
made or received that day.
The following day, the time stamp is changed to a date stamp. For more
information on time and date settings, see Section 9.3 on page 44.
To dial a number stored in the Call list, do the following:
1. Press
.
2. Step in the Call list and select the number to dial.
59
1424-EN/LZT 103 090 Uen A1 2008-10-24